Termékek ablakos telepítés becsült (555)

The space-saving feature of sliding in the interior and the high performance feature of the window are combined. The high air, wind and water impermeability values ​​brought by the Smart Slide system allow the sliding system to be easily applied even in high-rise buildings. With its EPDM wick structure, air and water impermeability, wind load resistance and thermal performance values ​​are provided at the highest level. Sliding system with the best performance value in the industry, with a water impermeability value of E1500 / 1500 Pa in EN standards, as determined by tests carried out in accredited test centers. The system allows multi-point locking. The system allows the use of glass up to 44 mm with profiles with wall thickness between 1.8 mm and 2.0 mm. In the system with a case depth of 144 mm, the wing depth is 51 mm. System Depth (Case):155 mm System Depth (Sash):71.5 mm System Height (Case):71.5 mm System Height (Sash):104.5 mm System Height (Case + Wing):152 mm System Visible width (Stamp):117.5 mm Applicable Glass Thickness:32 mm Air Impermeability:A4 – 600 Pa / EN 12207 Water Tightness:E1500 – 1500 Pa / EN 12208 Wind Load Resistance:C5-B5 – 2000 Pa / EN 12210 Thermal Insulation:(Uf) < 1.4 W/m²K

It is an innovative facade system that is especially preferred in high-rise buildings, is manufactured entirely in a workshop environment and allows rapid assembly without scaffolding. USG 80 panel facade system, which has high performance values, is applied with a special design for the project. The system, in which all panel manufacturing, including glass, can be done in a workshop environment with high workmanship quality, is formed by hanging the produced panel modules on the facade, one by one, without installing scaffolding, especially in tower type buildings. The 3-row wick structure between the modules provides the system with a tolerance gap in seismic movements such as earthquakes and provides high performance. The covered, silicone and semi-covered appearance offered in standard facade systems is also offered in panel facade systems. All openings such as reverse transom, parallel and standard wing openings on the facade can be made with this system. System Visible Width:80 mm System Depth:85 – 155 mm Applicable Glass Thickness:6 – 34 mm Air Impermeability:A4 – 600 Pa / EN12152 Water Tightness:RE1500 – 1500 Pa / EN12154 Wind Load Resistance:2400 Pa / EN13116 Thermal Insulation:Ucw < 1.6 W/m2K

It will provide good solutions to realize your designs with its perfect carrier and mechanics in creating natural stone-looking facades.

Palace ALUFACE

In glass railing solutions, it holds the glass on the ground from multiple points with its reliable and healthy connections made of aluminum profile and offers decorative alternatives at the record level. It can be applied in glass thicknesses of 17.5 mm, 21.5 mm and 16 mm.

Palace ALUBORD

The ADD ON system, which allows the carrier profiles to be made of steel at points where the openings allowed by the aluminum horizontal and vertical carrier profiles in the facade systems are not sufficient for the projects, can offer more transparent surfaces to designers. It is a system that can be used in projects made with steel construction, which has more load-bearing properties, instead of deep aluminum profiles, in large spaces where large openings must be crossed at once, such as airports and auto showrooms. The system, where the system depth is shaped by steel and glass combinations used in the standard FS 50 system can also be used, is preferred by designers due to its high inertia values. The system consists of aluminum profiles with a wall thickness between 1.8 mm and 2.0 mm combined with steel profiles selected for the facade. System Visible Width:50 mm System Depth:Shaped by the steel to be used Applicable Glass Thickness:6 – 52 mm

It is a high-performance series that provides the desired openings in projects with its normal sliding and Lift&Slide mechanism options. High strength and performance are offered with 24 mm glass fiber reinforced polyamide barriers. Different types from 1 moving wing to 6 wings can be easily produced with frame profile alternatives such as monorail, 2-rail and 3-rail. With the application of steel rails and bearings, wings weighing up to 200 kg can be carried with the system. With its EPDM wick structure, air and water impermeability, wind load resistance and thermal performance values ​​are provided at the highest level. With its Eurogrove channel structure, it is compatible with different brands and types of opening accessories. It allows multi-point locking. The system allows the use of glass between 20 mm and 32 mm with profiles with wall thickness between 2.0 mm and 6.6 mm. In the system with a case depth of 110 mm, the wing depth is 43 mm. System Depth (Case):110 mm System Depth (Sash):43 mm System Height (Case):53 mm System Height (Sash):81 mm System Height (Case+Sash):127.9 mm System Visible Width (Stamp):85.8 mm Applicable Glass Thickness:20 mm - 32 mm Airtightness:A4 – 600 Pa / EN 12207 Water Tightness:8A – 450 Pa / EN 12208 Wind Load Resistance:C3-B3 – 1200 Pa / EN 12210 Thermal Insulation:(Uf) < 1.8 W/m²K

Uninsulated sliding is bad. There are two alternative size solutions: Small and Large tuba riding.

Wooden and aluminum door systems with molded aluminum frames can be applied depending on the desired wall thickness. SP 40 adjustable door and sill systems have an aesthetic appearance thanks to their oval lines. It has the possibility of application in the desired wall thickness with its wide profile range. Special fittings at profile joints enable meticulous corner details to be created at 45 degree joints. It responds to all architectural applications with its paintability in the desired color. It does not rust, does not rot and is environmentally friendly. Practical and easy to install.

It is a new generation facade system that offers all the necessary expansions for projects with Covered (K), Semi-Covered (V) and Silicone (S) alternatives. Unlike conventional 50 mm wide facade systems, its 60 mm size gives the system the ability to pass larger openings and make more glass area. It offers the opportunity to be used in all projects designed for different purposes with its horizontal and vertical carrier profiles at different depths. The system, which includes insulators of different sizes to achieve high thermal values, is an ideal solution for vertical facades as well as inclined surfaces and roof applications. The system allows the use of glass up to 52 mm with profiles with wall thickness between 1.8 mm and 2.0 mm. System Visible Width:60 mm System Depth:80 – 205 mm Applicable Glass Thickness:6 – 52 mm Air Impermeability:A4 – 600 Pa / EN 12152 Water Tightness:RE750 – 750 Pa / EN 12154 Wind Load Resistance:1440 Pa / EN 13116 Thermal Insulation:(Uf) < 1.9 W/m²K

These are systems designed to achieve a transparent appearance on the facade, where the glass is connected to the carrier system (steel column-beam, glass or steel tension system) with special stainless glass holders. Glass can be applied as tempered laminated glass or tempered double glass. The joint gaps between the glasses can be insulated with UV resistant silicones.

SG 50K is a thermally insulated silicone facade system with a section depth of 50 mm. Vertical profiles with depths to meet different static values ​​are available in the system. Thanks to the condensate channel in the vertical profiles, facade water is easily discharged. In this system, air and water impermeability is maximized and application problems are eliminated. The hidden wing allows application with or without nails. Visible Internal Part:50 mm Visible External Part:16 mm Glazing Method:Bonding Applicable Glass Thickness:24 mm Sash Alternative:Insulated - Non-insulated

SARAY COTTA, the latest product developed by SARAY R&D, offers architects an alternative material for facade cladding. Saray Cotta is a system consisting of 100% Aluminum profile. Its feature is that it can be produced in brick or wood appearance. It provides an aesthetic appearance on the facade with its horizontal and vertical joints. Saray Cotta has the opportunity to be produced in the desired size according to the architectural project and the condition of the facade, and provides great advantages in terms of workmanship, time and cost. Additionally, thanks to its low unit weight of 7 kg/m², it does not impose any additional load on the building. And with this feature, it provides a great advantage in terms of labor, time and cost compared to baked clay materials. Saray Cotta profiles produced with Qualicoat paint technology do not get dirty, do not fade, are safe against fire, long-lasting and environmentally friendly.

It has a section depth of 50 mm. It is possible to apply vertically without notching the horizontal profile. It has the feature of being easy to work and economical. It has few accessories, easy assembly and fast manufacturing features. A condensate channel system can be created without notching by using both notched and special accessories. It has the features of covered - silicone facade, horizontal covered - vertical silicone, vertical covered - horizontal silicone, outward opening transom wing (insulated, uninsulated) and openable wing. Visible Internal Part:50 mm Visible External Part:20 mm Glazing Method:Bonding Applicable Glass Thickness:24 mm Sash Alternative:Insulated - Non-insulated

Saray A2 Mineral Dolgulu

We are designing safe cities! We produce mushroom barriers, arm barriers, road blockers and special productions for your projects... We carry out the design and production of barriers used in areas such as highways and streets, streets where pedestrianization projects are applied, shopping malls, parking lots, residences, military, government buildings, embassies, production facilities, hotels, airports and stadiums that require controlled and safe entry and exit with our expert team!

With our environmentally friendly production approach, we design benches suitable for usage purposes for parks, public spaces, banks, education centers, residences and the whole city. With our technological production track, we prepare the fastest and safest products in the number and sizes you want and offer them to the users. We respond to the expectations of both customers and end users with the production of durable urban furniture!

We design streets and avenues decorated with colorful flowers! We create environmentally friendly cities intertwined with nature. We produce flowerpots in different models and designs for parks, roads and streets, municipal and public buildings, mosques, educational institutions, shopping malls, hotels and landscape companies without compromising on quality. We prepare urban furniture as many as you want, from materials such as soil, concrete and steel, specific to your projects. If you want to get to the point fast and affordable quality urban furnitures in Turkey, let's meet together, let's create a pleasant living space.

sineklik, kurtkoy sineklik, sineklik kurtkoy, pendik sineklik, plise sineklik, menteseli sineklik, surgulu sineklik, sultanbeyli sineklik, sineklik istanbul, maltepe sineklik, kartal sineklik, tuzla sineklik,

Erlas' signature is in Turkey's most watched movies and TV series! We keep the pulse of the industry with our stage decor design and movie decor application services! We have implemented series decorations and stage decorations for successful TV and cinema projects, especially for the TV series "Establishment Osman", "Fatih - Fetih Bir Begindi". We continue to design and produce 3D models, facades, house and street animations in accordance with the scenario and concept. We prepare realistic decors with great care and attention with our expert team in the field of stage design!

We make colorful and fun stage designs for festivals that introduce your city and culture! It designs 3D advertisements, models and characters for municipalities and private institutions for annual festivals that showcase the history and famous values ​​of cities; we produce stage decoration applications, product promotion stands, welcome desks, podiums. We create long-lasting and useful products by integrating quality materials with ergonomic designs and creative ideas. We meet all the needs of your festivals completely and quickly with our innovative, affordable and solution-oriented product range.

We embody unlimited subjects and ideas specific to our customers' projects with art. We design and produce engaging and creative sculptures for museums, public buildings, social spaces, tourist attractions, businesses and personal properties. We produce special decorative sculptures for events and organizations. We always offer you the best service by integrating quality materials with ergonomic designs and creative ideas.

A good script, a successful director and an impressive stage design are essential for commercials that will hit the target from 12! By using technology in the most efficient way, we prepare 3D dummys and models to be used in your advertisements, and draw all the attention to your brand with stage decorations. We manage original stage decoration drawings, production and application processes with solutions specific to your company. We continue to push the limits of creativity, design and advertising, and produce successful stage decorations for striking advertisements!

Sultanbeyli Pimapen, kurtköy pimapen, sultanbeyli pimapen sultanbeyli pimapen sultanbeyli pimapen sultanbeyli pimapen sultanbeyli pimapen sultanbeyli pimapen sultanbeyli pimapen sultanbeyli pimapen sultanbeyli pimapen sultanbeyli pimapen sultanbeyli pimapenpimapen kurtköy, kurtköy pimapen 1, kurtköy pimapen bayileri, kurtköy pimapen servisi, kurtköy pimapen 2, kurtköy yenişehir pimapen, pendik kurtköy pimapen, pimapen sineklik kurtköy, kurtköy pvc pencere, pimapen kurtköy, pimapen pendik, en yakın pimapen, şeyhli pimapen, kurtköy pimapen bayileri, kurtköy pimapen servisi, kurtköy yenişehir pimapen, pendik kurtköy pimapen, kurtköy pvc pencere, pimapen kurtköy, pimapen pendik, en yakın pimapen, pimapen sineklik kurtköy, şeyhli pimapen, pimapen kapı, pimapen sultanbeyli,pimapen sineklik, pimapen kilidi, pimapen pencere, pimapen fiyat, pimapen tamiri, sultanbeyli pimapen, pimapen sultanbeyli, sultanbeyli pimapen

Sosis Kol Aynalı Teknik Bilgiler Yüzey Renk Seçenekleri : Eloksal , Şampanya , Beyaz , Siyah , Naturel , Pres. Kullanım Alanı : Alüminyum kapı doğrama sistemlerinde kullanılmaktadır. Birçok kapı profillerine uygundur. Aluminyum profilden üretilmiştir. İstenilen eloksal renk yapılabilir. Malzeme Cinsi : Sap Aluminyum , Ayna Aluminyum

Fast, serial and precise dimensioning opportunity with step motor Touch screen panel Fast material flow thanks to roller wheels System that adapts to cutting machines. Easy-to-use design. Cutting capacity up to a maximum of 3 meters. (for special order 4,5m)

We make your place special for your guests, we work diligently for a perfect organization! For all kinds of meetings, congresses and seminars, we make decorations and stage preparations according to your needs and preferences. We enable you to complete your organizations successfully by producing a welcome table, lectern, program board, directional signs, display stands, podium, dummy and model. We provide you with an unforgettable event with quality materials and meticulous craftsmanship, and we promise trouble-free stage decoration.

- Two Saws with a diameter of 500 mm. diamond saw and is also a German brand Schaffer. - It is possible to work in aluminum and PVC profiles. MOTOR SERVO - The screen we use is a Mitsubishi brand with a PLC driver - We use Schneider in electrical materials. - We use the Japanese liner Ray and the car. - You can cut any profile length with a long measurement program. Although the machine is 4 meters long, if you want to cut 6 meters, the machine adjusts it. - The machine has an automatic slicing function. - Suitable for optimization programs such as ERKO and ABT. - There are 4 options for a foreign language. - You can connect to the Internet from far away and detect an accident. There is a menu on the screen that shows where the accident is. - Has a lubrication cooling system for the aluminum profile.

Finishing is done using the original Lacquer paint. Door leaf; Wooden carcass is manufactured from artificial dried fir wood and MDF.